Answers are grounded in this paper and cite their sources.
We report on mid-wave infrared InAsSb photodetectors with high-barrier materials implemented in the depletion region. The devices exhibit promising performance at high temperature. At 160 K, the 50% cutoff wavelength is <tex-math notation="LaTeX">4.18~μ m </tex-math> , and the shot noise limited detectivity <tex-math notation="LaTeX">D^ </tex-math> is <tex-math notation="LaTeX">1.57× 10 ¹² </tex-math> cm <tex-math notation="LaTeX">· </tex-math> Hz <tex-math notation="LaTeX">1/2 </tex-math> /W for the peak wavelength of <tex-math notation="LaTeX">3.79~μ m </tex-math> . At 300 K, the 50% cutoff wavelength is <tex-math notation="LaTeX">4.70~μ m </tex-math> , and the <tex-math notation="LaTeX">D^ </tex-math> is <tex-math notation="LaTeX">4.87× 10 ⁹ </tex-math> cm <tex-math notation="LaTeX">· </tex-math> Hz <tex-math notation="LaTeX">1/2 </tex-math> /W for the peak response wavelength of <tex-math notation="LaTeX">4.15~μ m </tex-math> . The dark current of the device is found to be dominated by the diffusion current rather than the generation-recombination current for the temperature range of 160–300 K. We also determine the Varshni parameters of the InAsSb material with varying strain, and the bandgap bowing parameters.
No takes yet. Share an insight, caveat, or question.
Xue et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: