Answers are grounded in this paper and cite their sources.
The recent horizontal well was drilled with expectations to have some residual heavy oil separated within fault block. It required precise information for both fault and structural prediction, enhanced well placement, and completion optimization. Considering the well challenge and objective, formation evaluation was highlighted as critical where the complex pore structure will play a big role in fluid mobility, viscosity, saturation, presence of tar, permeability, irreducible water saturation, and rock quality. This paper presents integrated advanced LWD technologies that help with heavy oil identification in horizontal wells. Ultra-high-definition resistivity imaging was used to study azimuthal formation porosity distribution in order to quantify the different porosity portions (Primary / Secondary). Following that, facies determination was obtained based on porosity spectrum, amount of secondary porosity combined with relevant logging results using neural network technique. This is significant to optimize well placement in the best reservoir rock types. Other than that, the use of LWD NMR helps to determine rock typing and formation permeability profile. This qualitative interpretation is supported by advanced mud logging services and THCnorm ratio to assist interpretation of the hydrocarbon zone. Real-time support was done to execute the well as per the objective. The well was drilled through the A and B reservoirs and confirmed the penetration of several faults and fractures. The usage of the high-resolution resistivity images confirmed the development of secondary porosity 20% higher than matric porosity. NMR provided unique fluid typing information and quantified the heavy oil viscosity variations, which could not be quantified from density/neutron or resistivity measurements. Heavy oil with a viscosity of up to 30 cP was found in the middle zone of the A Reservoir. Oil viscosity was observed to change laterally, as it varied each time the same layer was crossed. NMR also confirmed no significant presence of heavy oil in B-Reservoir. The interpretation of Advanced Mud logging confirmed hydrocarbon bearing reservoir, that has very good agreement from LWD interpretation. Effective use of the latest technologies allows for studying and improving the current formation evaluation in carbonate reservoirs.
No takes yet. Share an insight, caveat, or question.
Alghareeb et al. (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: