Answers are grounded in this paper and cite their sources.
When operating an electronic device powered by a battery, engineering students often face the question of how to calculate the run time of the device. While there is a plethora of information on the Internet about batteries, engineering students often find it difficult to obtain a reasonably accurate estimate of the run time of a device. Such difficulty appears to be attributed to: 1) the run time estimation tends to be obtained simply from dividing the battery capacity in mAh by the current draw of a device given in mA; 2) certain electronic devices are powered via a dc-dc converter, instead of being directly connected to a battery, for a step up/down conversion or better regulation of the supply voltage to the device. On the first attribute above, for a battery capacity of x mAh, if an electronic device draws a constant current of y mA from the battery, then, students would generally estimate the run time t of the battery by t = x/y. For instance, the run time of a device drawing a constant current of 100 mA from a 1600 mAh battery would be 16 hours; or, for a device drawing a constant current of 50 mA, the run time would be 32 hours. In reality, however, this ideal run time calculation doesn't provide a practically accurate estimate for most, if not all, of the battery-powered devices used in student projects. Part of the reasons is that the accurate run time estimation involves various discharge characteristics of a battery and also the relation between the battery capacity and its terminal voltage is not often straightforward to determine for a device under test. All electronic devices would stop operating when the supply voltage drops below a certain threshold, and the battery's terminal voltage also gradually drops while discharging at a certain rate depending on its discharge characteristics. So, battery-powered devices could stop operating before the battery reaches its empty state of charge, resulting in a practically inaccurate estimation of the run time if the battery's empty-state was assumed for the estimation. On the second attribute, the use of dc-dc converters is self-explanatory for the reasons mentioned above. It should be noted, however, that dc-dc converters could effectively compensate for the drop in the terminal voltage of a battery to some extent as dc-dc converters typically have a wide range of input voltages to output a well-regulated constant voltage. Taking all of these aspects into account and estimating a practically accurate run time of an electronic device is a daunting task to most students. This paper describes how to alternatively estimate the run time of an electronic device powered by a battery via a dc-dc converter in a way that typical engineering students can easily adopt without complete understanding of the details of battery-related parameters and characteristics. For the purposes of illustration, we utilize a set of electronic devices put together to conduct video streaming in a balloon flight during the 2017 total solar eclipse.
No takes yet. Share an insight, caveat, or question.
Wookwon Lee (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: