Answers are grounded in this paper and cite their sources.
This work demonstrates enhanced ethanol oxidation in membraneless fuel cells using Pt–Sn–Mg/C electrocatalysts, suggesting improved efficiency over other compositions.
The present work reports the performance of Pt–Sn–Mg/C ternary electrocatalysts on ethanol oxidation reaction in membraneless fuel cells prepared by thermal reduction method. A systematic investigation of ethanol adsorption and oxidation on binary and ternary electrocatalysts in sea water was performed in membraneless ethanol fuel cells. The different nominal compositions of binary Pt–Sn/C, Pt–Mg/C, and ternary Pt–Sn–Mg/C electrocatalysts were characterized by XRD, EDX, and TEM techniques. XRD and EDX confirmed the formation of Pt–Sn–Mg/C, Pt–Sn/C, and Pt–Mg/C metal catalyst with a typical Pt crystalline structure and the formation of Pt–Sn alloy. Electrochemical analyses obtained at room temperature by cyclic voltammetry and chronoamperometry showed that Pt50Sn40Mg10/C gives a greater current density in comparison to that of Pt50Sn30Mg20/C, Pt50Sn25Mg25/C, Pt50Sn50/C, and Pt50Mg50/C. The power density obtained using Pt50Sn40Mg10/C (39.2 mW cm-2) as an anode catalyst in membraneless ethanol fuel cell was higher than that using Pt50Sn30Mg20/C, Pt50sn25Mg25/C, Pt50Sn50/C, and Pt50Mg50/C at the room temperature. CO poisoning can be reduced as a result of enhanced cell performance by the addition of Mg on the anode electrocatalysts. In this study, the carbon-supported binary Pt–Sn, Pt–Mg, and ternary Pt–Sn–Mg anode catalysts were successfully tested in a single membraneless fuel cell using 1.0 M ethanol and 0.5 M H2SO4 as the fuel and 0.1 M sodium perborate in sea water as the oxidant.
No takes yet. Share an insight, caveat, or question.
Kalaikathir et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: