Answers are grounded in this paper and cite their sources.
This study extends an equivalent boundary layer model to generate inflow turbulence for adverse pressure gradient turbulent boundary layers, indicating improved flow characteristics.
For direct and large-eddy simulations of turbulent boundary layers (TBLs), the inflow turbulence conditions decisively influence the downstream flows. Recently, Wang et al. [“Inflow turbulence generation using an equivalent boundary layer model,” Phys. Fluids 35, 075110 (2023)] proposed an equivalent boundary layer (EBL) model to generate inflow turbulence fluctuations for zero-pressure gradient (ZPG) TBLs. In the present study, this model has been extended to TBLs with adverse pressure gradient (APG). Compared to the former model, the present model incorporates the mean wall-normal velocity, which is more prominent in APG TBLs than in ZPG TBLs. In addition, a filter is imposed on the streamwise velocity to suppress the amplified streamwise large-scale structures. The driving force was obtained from the databases and the prediction models of the APG TBLs. The present EBL model was applied to the generation of the inflow turbulence for two APG TBLs with (Reθ, β)=(2180,2.2) and (4100,1.4) at the inlet, where Reθ is the Reynolds number based on the momentum thickness θ and β is the Rotta–Clauser pressure-gradient parameter. The results show that the EBL model well reconstructs the turbulent fluctuations of the TBL at the corresponding Reθ and β and can ensure the natural downstream development of the flow when used as the inflow for streamwise developing TBL simulations.
No takes yet. Share an insight, caveat, or question.
Li et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: