Answers are grounded in this paper and cite their sources.
This method of DAS logging improves frequency band attributes in gas and fractured wells, indicating enhanced monitoring and reduced noise.
The oil and gas industry currently faces the dual challenge of enhancing extraction efficiency and reducing environmental impact. Traditional well- monitoring technologies are increasingly insufficient for modern oil and gas operations due to technical limitations and environmental concerns. Data acquisition system (DAS) logging, which uses optical fibers as sensing elements, enables real-time and precise monitoring of well injection and production processes. However, distributed fiber-optic vibration signals are vulnerable to external interferences, such as temperature changes, fiber bending, and mechanical vibrations during transmission. In practical applications, issues such as noise interference, baseline drift leading to trend signal distortion, and spectral fencing effects arise. If FBE (Frequency Band Energy) processing is applied directly, integrating DAS signals from different time periods through Fourier transformation to extract frequency band attributes will severely compromise the accuracy and reliability of the final integrated DAS profile. To address these issues, a comprehensive DAS logging data processing method is required, aimed at both quick on-site interpretation and detailed post-quantitative interpretation. The DAS data processing is divided into two categories: quick processing and detailed processing. Quick processing applies windowing to the raw data, followed by Fourier transformation, effectively suppressing trend signals and spectral fencing effects. The frequency band attributes are then extracted from the windowed spectrum. This approach is fast and suitable for rapid, qualitative on-site interpretation. In contrast, detailed processing first involves detrending the raw signal, followed by Gaussian convolution smoothing of the detrended DAS signal. Improved wavelet threshold denoising is then applied to clean the smoothed signal further. Finally, Fourier transformation is performed on the denoised signal to extract frequency band attributes. This method eliminates trend signals, spectral fencing effects, and a significant amount of noise, optimizing details, enhancing resolution, and improving the signal-to-noise ratio. Compared to quick processing, detailed processing not only extracts trend signals but also provides a more refined display of low-frequency signals. However, it is slower and more suitable for post-analysis quantitative interpretation. The accuracy and practicality of this method have been validated in the processing of monitoring data from gas and fractured wells, addressing the challenges of DAS logging in the oil and gas industry and providing technical support for efficient, environmentally friendly, and intelligent management of oil fields.
No takes yet. Share an insight, caveat, or question.
Deng et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: