Answers are grounded in this paper and cite their sources.
This research presents a marine free-surface panel method to improve wave resistance estimates, utilizing effective boundary conditions.
The purpose of this work is to present the development of a marine free-surface panel method. Three different linearized boundary conditions and corresponding wave elevations are presented. Wave resistance is calculated using pressure integration or wave cut analysis. The processes for setting up the velocity influence coefficient matrices, satisfying the radiation condition, and choosing and placing singularities are presented. The method for satisfying the radiation condition used here is robust and flexible. INTRODUCTION Panel methods are often used to predict aerodynamic forces in the preliminary design of aircraft (for example see Johnson 1980; Shah et al. 2025; Africawala and Joksimovic 2024; D'Silva et al. 2024). The governing equation for most basic panel methods is Laplace's equation, which expresses the incompressible flow of an inviscid fluid. Typically, the fluid domain extends to infinity, which works well for cases such as aircraft flying far from the ground or submersibles travelling far below the water surface and far above the sea floor. For cases simulating interactions with a solid boundary, such as an aircraft in ground effect, an extra surface is simply added on which the usual boundary conditions are applied. However, to simulate a submersible near the water surface or a ship hull piercing the surface, a different approach is needed. This is because the movement of the body being analyzed deforms the surface of the water, which in turn affects the pressures acting on the body. This means a different boundary condition that reflects the deformation of the free surface must be applied. Over the past several decades, a variety of methods have been developed to extend panel methods to handle free surface effects. One of the earliest and most influential was that of Dawson (1977), which introduced a linearized free-surface boundary condition within a steady state source based panel method. Since then, researchers have explored variations of Dawson's method (for example see Kim et al. 1989; Lalli 1997; Nicolas et al. 2023).
No takes yet. Share an insight, caveat, or question.
Goates et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: