Answers are grounded in this paper and cite their sources.
Numerical analysis highlights sensitivity of temperature monitoring to co2 leakage in well cement, suggesting implications for detection strategies.
Carbon dioxide disposal is a widely and actively discussed topic all over the world and in Russia in particular. The disposal sites are often formations flooded with industrial water at a considerable depth, where carbon dioxide can get in a supercritical state due to high pressure. In this state, the gas exhibits increased corrosion characteristics and fluidity, so it is believed that when burying it, it is necessary to pay close attention to the wells that intersect the carbon dioxide disposal site. One of the main ways to track leakages is to monitor the temperature in the wells. It is known that carbon dioxide cooled relative to the surrounding environment reduces the temperature of the well vicinity where the leakage occurs. The delamination of cement stone from a steel column with a physically feasible width of 0.1–0.3 mm was simulated. Numerical estimates are given for the leakage detection possibility using cemented fiber-optic distributed well thermometry with an assumed detection level of 0.1 C. It is found that the masses of detected leakages fall within the first tonnes. The main factor in leakage detection is its velocity. If the leakage velocity by delamination is less than 0.1 m/s, it is difficult to detect using nearby sensors – less than 3 m from the leakage point. If the leakage velocity is more than 0.3 m/s, it can be detected using sensors located 10–30 m away from the leakage point.
No takes yet. Share an insight, caveat, or question.
Yaskevich et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: