Answers are grounded in this paper and cite their sources.
Experimental analysis reveals a 33% reduction in torque using advanced water jet technology for rock cutting, indicating enhanced efficiency.
This paper introduces an innovative self-controlled hydraulic cutting head (SCHCH) with adaptive hydro-picks that dynamically adjust high-pressure water supply based on cutting conditions. First, based on fracture mechanics, a model is constructed to describe the decline rate of cutting force when a water jet assists a conical pick in rock breaking. Furthermore, the flow characteristic of the self-controlled hydro-pick was carried out to explore the water-saving characteristics. Regarding the factors influencing the dynamic response characteristics of the self-controlled hydro-pick, whether for the opening or closing response time, the order of significance from high to low is cutting depth A, jet pressure C, and cutting speed B. In addition, the rock breaking performance of the cutting head with different arrangements of water jet nozzles and conical picks (WJCH) was also analyzed. The results found the cutting torque decrease percentage was 33%, 16%, 40%, and 38% for the nozzles of the cutting head positioned at the front (FWJCH), rear (RWJCH), center (CWJCH) of the pick, and SCHCH, respectively, and the standard deviation of the SCHCH was the lowest. Finally, the effect of different configuration modes on dust reduction was explored by analyzing the dust concentration during rock breaking. The dust concentrations in FWJCH, RWJCH, CWJCH, and SCHCH models were 2.34, 1.91, 1.88, and 1.97 mg/m3, respectively, and the corresponding dust reduction percentages were 32.76%, 45.11%, 45.98%, and 43.39% compared with the cutting head without water jet assistance (NWJCH).
No takes yet. Share an insight, caveat, or question.
Xu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: