Answers are grounded in this paper and cite their sources.
Observational analysis reveals impact energy and tensile strength in welded LT FH32 steel, indicating compliance with classification regulations.
This study investigates the effect of the welding process on the microstructure and mechanical properties in the weld zone of LT FH32 steel used for cargo tanks of LPG carriers. The microstructure of the base material indicates fine polygonal ferrite and pearlite, as well as a pearlite band elongated by hot rolling. The tensile and impact properties in the longitudinal direction in the base material show higher values than those in the transverse direction, whereas the values in all directions satisfy the classification regulations. In a metal welded via SAW, acicular ferrite and primary ferrite structure are observed, whereas in a metal welded via FCAW, a polygonal ferrite structure is observed due to the effect of reheating from subsequent welding. The microstructure of metal welded via SAW shows a large CGHAZ of well-developed grain-boundary ferrite. The tensile strength of the weld satisfies the classification regulations in terms of both the welding process and the heat-input range. Similarly, the absorbed impact energy at all notch positions of the weld satisfies the classification regulations.
No takes yet. Share an insight, caveat, or question.
Choi et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: