Answers are grounded in this paper and cite their sources.
Analysis reveals optimized FAME yields in biodiesel from palm oil with 20% methyl acetate, indicating process efficiency.
Methyl ester co-solvent will accelerate the reaction without the need for a separation stage at the end of the reaction. The study aims to determine the effect of FAME co-solvent concentration and time of reaction on the methyl ester produced in the interesterification reaction of palm oil into biodiesel with methyl ester co-solvent. The weight of the oil used was 250 g, the mole ratio of oil: methyl acetate = 1:6, the temperature was 60oC, the concentration of the co-solvent (0 - 20%), the reaction time (30-90 min), the catalyst KOH 1% and the stirring speed was 800 rpm. The oil, methyl acetate and catalyst were placed in a three-necked flask and the reaction was carried out according to the operating conditions. The optimum conditions were obtained in the palm oil interesterification process with a FAME co-solvent concentration of 20% and a time of reaction of 30 min with a methyl ester concentration of 61,413 mg/L and an acid value of 0.28 mg KOH/g which met SNI 7182-2015. The research revealed a biodiesel production process with fewer steps, faster reaction times, higher yields, and product physical properties that meet standards. It is hoped that this process can be implemented at a pilot plant scale, bringing the selling price of biodiesel closer to that of diesel fuel.
No takes yet. Share an insight, caveat, or question.
Daryono et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: