Answers are grounded in this paper and cite their sources.
Numerical modeling study reveals enhanced resource recovery in unconventional reservoir development, suggesting integration of hydraulic simulations and geomechanics.
_ This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper URTeC 4263421, “Numerical Investigation of Multibench Interference and Field Development Optimization,” by Ruiting Wu, SPE, Xiaolong Liu, and Amit Singh, SPE, Chevron, et al. The paper has not been peer reviewed. _ In unconventional reservoir development, the presence of multiple benches may introduce vertical interference. By incorporating detailed geological, petrophysical, and hydraulic fracturing models, the authors aim to better predict and mitigate the effects of interbench interactions, enhancing the productivity and economic viability of unconventional reservoir projects. A numerical modeling study of multibench interference using a coupled hydraulic fracturing propagation, reservoir flow, and geomechanics tool has been conducted. This tool integrates hydraulic fracture simulation with geomechanics, allowing it to capture stress changes caused by depletion at the parent well. Field Description Multibench development in the Permian Basin, particularly in regions such as the Delaware and Midland Basins, has been adopted widely. The field case study presented in the complete paper focuses on a development area in the Permian Basin specifically targeting three stacked reservoirs. As illustrated in Fig. 1, a wine-rack pattern of horizontal wells is chosen to achieve economic and effective production from multiple layers simultaneously. This approach allows for optimal resource recovery by drilling and completing wells in a strategic arrangement. These stacked reservoirs exhibit varying geological properties. To avoid production interference between wells and enhance overall production efficiency, an integrated hydraulic fracturing and reservoir simulation modeling approach is used. This modeling guides strategic planning of the development area by investigating various development strategies, including well spacing, codevelopment vs. phase development, three benches vs. two benches, and completion design. Model Setup To conduct the simulation in a reasonable time, instead of simulating all the horizontal wells in this section, a sector model of one well from each bench is built. Furthermore, instead of the entire well model, only three stages from each well are simulated. Because only one well from each bench is modeled, a zero-permeability region is added in the model to simulate competition for the drainage area from neighboring wells. A validation run is conducted to compare the cumulative oil production from the three-well model (one well in each bench) using the zero-permeability region to a model including all nine wells (three wells in each bench, with a total of nine wells in three benches). The three-well model without the zero-permeability region produces a larger area. In contrast, the cumulative oil production from the three-well model with the zero-permeability region closely matches the results from the nine-well model.
No takes yet. Share an insight, caveat, or question.
Chris Carpenter (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: