Answers are grounded in this paper and cite their sources.
Simulation compares methods for virtual source placement, showing streamlined approach may match image quality in ultrasound imaging.
Ultrasound array probes can transmit diverging wavefronts from virtual source (VS) locations behind the array to obtain ultrafast compounded images with a broad field-of-view, but determining a practical set of diverging-wave VS locations is non-trivial, given the infinite half-plane of possibilities. In this work, we propose VS placement at a constant radial distance r from the array origin, and we compare this to a previous (and less direct) method of VS placement at a constant opening angle β relative to the ends of the array. Each method was implemented in Field II with a 64 element, 2.7 MHz phased-array geometry to simulate point-spread functions (PSFs) at regular 10 mm intervals over the field-of-view; the lateral and axial resolution, peak side-to-main lobe amplitude ratio (PSMR), and maximum amplitude of each PSF were measured. Each method was also implemented on a research scanner with a corresponding probe to acquire images of a tissue-mimicking phantom for comparison. Results from both methods in simulation and phantom experiments showed that the increase in PSF lateral resolution with range was consistent (≈38 µm/mm) and the mean axial resolution agreed within 0.01 mm; mean differences in PSMR and amplitude were <5% and <4%, respectively. Generalized contrast-to-noise ratio (gCNR) was highest for the constant-β 2 method, with differences between methods within ±1%. These results indicate that, relative to the constant-β method, comparable image quality can be achieved with a streamlined constant- r method of VS placement for diverging-wave ultrafast imaging.
No takes yet. Share an insight, caveat, or question.
Dozier-Muhammad et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: