Answers are grounded in this paper and cite their sources.
Analysis shows solution temperature affects microstructure and mechanical properties of AlSi37Cu alloy, indicating optimal processing parameters.
This study systematically investigated the effects of solution temperature (460–560 °C) on the microstructure, mechanical properties, and corrosion behavior of AlSi37Cu0.7Mg0.9Ni0.2 alloy rods prepared by rapid solidification and hot-extrusion. The results demonstrated that the solution temperature critically governed the alloy’s recrystallization behavior, precipitation kinetics, and phase distribution. With the increase in solution temperature, the alloy exhibited progressive grain coarsening (from 4.51 μm at 460 °C to 13.25 μm at 560 °C) and enhanced precipitation hardening, leading to a 108.8% increase in hardness (198.4 HV at 560 °C) but a concurrent reduction in ductility (from 2.5% to 1.0%). Electrical conductivity initially improved by 3.4% at 460 °C (27.44% IACS) compared with the extruded state, but deteriorated at higher temperatures due to increased electron scattering. Anodic oxidation tests revealed a non-monotonic corrosion trend, with maximum weight loss (57.50 mg·g−1) occurring at 480 °C due to microstructural inhomogeneity, while higher temperatures (560 °C) partially restored corrosion resistance. Electrochemical analysis corroborated these findings, showing the 480-treated sample exhibited the lowest corrosion potential (−1.0159 V). Microstructural characterization confirmed that optimal mechanical properties were achieved through a combination of fine β″-Mg2Si (<20 nm), θ′-Al2Cu precipitates, and thermally stable Al3Ni phase. These results established a comprehensive process-structure-property relationship, which provided critical guidance for tailoring the alloy’s performance in structural–functional applications.
No takes yet. Share an insight, caveat, or question.
Mao et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: