Answers are grounded in this paper and cite their sources.
Thermodynamic modeling improves compressive and tensile strengths in alkali-activated materials, suggesting enhanced resource utilization of industrial wastes.
Synthesizing alkali-activated materials (AAM) with multi-component feedstock is a promising technology for resource utilization of massive industrial wastes, and there is an urgent need to develop proportional design methods. A thermodynamic modeling assisted design method was proposed for the fly ash (FA)-granulated blast furnace slag (GBFS)-steel slag (SS) AAM, of which the mechanical properties and multi-scale shrinkage were modified by incorporating graphene oxide (GO). The FA/GBFS mass ratio and SS content had a significant effect on the solid–liquid and crystalline phases, consistent to the thermogravimetric analysis and mechanical performances of the AAM. For the optimized FA:GBFS:SS mass ratio of 3:5:2, the mechanical strengths increased with the increment of GO content, then decreased, while the shrinkages at different stages and scales followed the opposite trend. At a GO dosage of 0.01%, the compressive, flexural, and tensile strengths increased by 9.6%, 67.1%, and 135%, respectively, while the chemical, autogenous, and drying shrinkage were reduced by 43.2%, 26.5%, and 46.1%, respectively. These modifications were mainly attributed to the refined pore structure and decreased micro-cracks of AAM through bridging and filling effects of GO, and the increased formation of C(N)-A-S–H gels thanks to the raised nucleation sites by the high specific surface areas of GO.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: