Research on the Combined Inhibition of Sodium Sulfide and Sodium Thioglycollate for the Flotation Separation of Chalcopyrite and Molybdenite

Molybdenite and chalcopyrite closely coexist and have good natural floatability. During the Cu-Mo separation process, it is necessary to enhance the inhibition of chalcopyrite to reduce its influence on molybdenite. In this paper, a combined inhibitor, sodium thioglycollate (HSCH2COONa) and sodium sulfide (Na2S), with a molar ratio of 2:1, was obtained through pure mineral flotation experiments. It could reduce the impact on molybdenite while maintaining a good inhibitory effect on chalcopyrite. In the artificial mixed minerals test, the use of the combined inhibitor (80 mg/L) can achieve good indicators with Mo grade and recovery rate of 54.34% and 88.12%, respectively, and Cu grade of 2.15%. The contact angle test shows that the combined inhibitor can significantly reduce the wettability of the chalcopyrite surface while having a relatively small effect on molybdenite. The infrared spectroscopy and SEM-EDS energy spectrum indicated that the combined inhibitor C = O and S-H groups underwent chemical reactions on the surface of chalcopyrite and squeezed out kerosene on the surface of chalcopyrite. Molecular dynamics simulations indicate that the HS−, S2−, and HSCH2COO− components in the combined inhibitor are more likely to act on the surface of chalcopyrite, exerting an enhanced inhibitory effect on chalcopyrite.