Evaluation of Particle Deposition Characteristics in Bent Tubes at Different Dimple Locations

The deposition of particulate matter on rough pipe surfaces is critical in fields such as energy, chemical engineering, and air pollution control. This study employs a combined approach utilizing the Renormalized Group (RNG) k-ɛ model and the discrete phase model (DPM). The particle deposition characteristics in circular bent pipe channels with different dimple positions were investigated. To improve simulation fidelity, a model for particle-wall rebound was developed using user-defined function (UDF). The results indicate that the dimple structure influences the deposition location of particles. Particle deposition is minimal on the lower surface and leeward side of the dimple structure. For operating conditions where St ≤ 0.27, θ = 15° yields the optimal effect on enhancing the particle deposition rate, achieving a maximum increase of 18.2%. For conditions where St ≥ 0.461, the optimal angle is θ = 30°, resulting in a maximum deposition rate increase of 14.126%. The deposition rate of dimple structures varies depending on their installation location. In this study, the deposition rate was lowest at θ = 65°. The dimple structure can serve as a sacrificial element, providing protection for the rest of the bent pipe. In the future, channels incorporating this structure can be applied to removal or air purification equipment.