Research on Multi-Beam Interference Competition Suppression Algorithms for Laser Doppler Vibrometry

The Laser Doppler Vibrometer (LDV) is widely used in precision vibration measurement due to its non-contact nature and high accuracy. However, when measuring non-cooperative targets, the internal stray light in the LDV interferes with the target’s return light, creating competition with the reference light, a phenomenon known as interference competition. This issue is particularly prominent in integrated transceiver LDV systems, where the backscattered light from the lens can be comparable in intensity to the target’s return light, significantly degrading phase extraction accuracy and limiting the LDV’s applicability. To address this challenge, this paper proposes a noise suppression algorithm based on the In-phase and Quadrature (IQ) demodulation. The algorithm uses the power spectrum within each frame’s relevant frequency band as an evaluation metric and employs the Three-point Probe Extremum Localization (3P-PEL) method to estimate the amplitude and phase of the stray light interference with the reference light in real time. This enables the accurate extraction of the interference signal between the measurement light and the reference light. Both simulations and experiments validate the effectiveness of the proposed method. The simulation results demonstrate that when the stray-to-measurement power ratio is below 0.25, the proposed algorithm can suppress spurious signals induced by multi-beam interference by more than 25 dB, while experimental results show it can reduce such signals below the LDV’s noise floor in various motion scenarios. The proposed algorithm holds potential applications in laser interferometry and effectively enhances LDV measurement accuracy.