Stable operation characteristics of the pressurized water thermal storage tank system based on nitrogen pressure control

To address the challenge of frequent pressure fluctuations in traditional insulated compressed air thermal storage systems, this study develops a pressurized water thermal storage double-sphere tank solution with nitrogen pressure control as the key technology. By Computational Fluid Dynamics modeling and process simulation, the energy conversion between pressurized water and nitrogen, and the multi-phase fluid flow process during the operational cycle were thoroughly investigated. Additionally, long-term dynamic simulations of the sphere tank were conducted to extensively explore the dynamic response characteristics of the gas temperature field and pressure field under different thermal storage temperatures, flow rates and cycle numbers. The research results are as follows: firstly, the pressure changes of the system follow a trend of first decreasing, then remaining constant, then increasing, and finally decreasing during a cycle. No evaporation occurs because the minimum pressure remains above the saturation. The obvious temperature decrease is observed at the second static stage, while the cold tank temperature remains constant. Secondly, the differences in the resistance coefficient results in the non-linear relationship between heat storage flow rate and gas pressure. At a high flow rate of 105.79 kg/s, the pressure reduction remains moderate. Finally, both the gas temperature field and pressure field have reached equilibrium after three cycles, with the maximum pressure (1.42 MPa) occurring at the end of the heat release stage. The initial temperature and pressure of the next cycles rapidly increase because of heating, which is the main difference between them.