Answers are grounded in this paper and cite their sources.
Simulation shows that optimizing secondary air locations reduces emissions in municipal solid waste incineration, suggesting enhanced efficiency.
Incineration is an efficient method for solid waste treatment and energy recovery. Secondary air is a critical parameter in the operation of incinerators, yet information on how the position of secondary air affects the incineration of Municipal Solid Waste (MSW) remains poorly understood. Computational Fluid Dynamics (CFD) modeling serves as effective tool for the optimal design and operation of waste incinerators. This study employs ANSYS FLUENT 2021 R1 as the simulation platform to investigate the impact of different secondary air positions on the incineration process in a moving grate incinerator. An optimized incinerator model was developed, featuring three configurations: a baseline case without secondary air and two cases with secondary air inlets at distinct positions. Unlike other secondary air simulations, the solid waste in this study is treated as a porous medium, incorporating chemical reactions related to waste incineration. The results of the FLUENT simulation are visually presented through contour plots, facilitating comparative analysis to determine the optimal configuration for the secondary air inlet. The findings demonstrate that proper secondary air placement significantly reduces soot and pollutant gas concentrations. The CO emissions of pollutant gases was reduced by 92.5%, while the NO concentration was reduced by 95% and 90%, respectively. The model with the secondary air position that yields higher waste calorific value and lower pollutant emissions is identified as the optimal configuration.Implications: This study is the first to systematically evaluate how secondary-air port location influences both incineration performance and pollutant emissions in a grate-fired waste-to-energy boiler. The optimal air-staging configuration identified here markedly raises the calorific value of the waste while simultaneously slashing CO and NOx emissions. These findings deliver concrete engineering parameters for the design, retrofitting, and operation of incineration facilities, enabling immediate technological upgrades for efficiency and emission reduction across the global waste-to-energy sector. Moreover, the results provide a scientific basis for governments to formulate stricter emission standards and to incentivize secondary-air optimization retrofits, thereby accelerating the transition toward cleaner resource recovery of municipal solid waste under carbon-peaking and carbon-neutrality goals.
No takes yet. Share an insight, caveat, or question.
Zhi et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: