Answers are grounded in this paper and cite their sources.
This work demonstrates a new buckypaper cathode with high tensile strength and cycle stability in lithium-ion batteries, indicating potential for flexible electronics.
Single‐crystalline ultra‐fine sized LiNi x Co y Al 1‐x‐y O 2 (NCA) features stable Al─O bonds and crack‐resistantance due to no grain boundaries, exhibiting excellent long charge–discharge cycle stability as a lithium‐ion battery cathode. With flexible electronics growing, flexible energy storage materials are urgently needed. However, preparing single‐crystalline ultra‐fine NCA particles and assembling them into a self‐supported superflexible cathode is still a tough challenge. Here, submicron‐sized Ni‐rich LiNi 0.89 Co 0.09 Al 0.02 O 2 single‐crystals were made via a molten‐salt‐assisted high‐temperature solid‐phase method with lithium added during annealing. Then, they were combined with carbon nanotubes by directional pressure filtration to form a superflexible porous hybrid buckypaper (BP). Under O 2 , sintering at 750°C for 15 h with 1.03 Li addition and annealing with a Li source at 750°C for 5 h gave the optimal submicron‐sized NCA single crystals. The BP could curl around a 2 mm‐radius rod, bend 180°, knot without damage, and had 9.59 MPa tensile strength. In a lithium‐ion battery, at 1C, its initial and 200‐cycle capacities were respectively 192.27 and 179.3 mAh/g (93.2% retention); at 5C, respectively 135.4 and 132.9 mAh/g (98% retention). This work offers a new idea for self‐supported flexible cathode construction.
No takes yet. Share an insight, caveat, or question.
Cai et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: