Answers are grounded in this paper and cite their sources.
This work demonstrates a novel method for accurate shape sensing and boundary-condition assessment in beams, implying enhanced monitoring capabilities.
The inverse finite element method (iFEM) reconstructs full-field displacements from strain data without prior knowledge of loads or material properties. However, unknown or time-varying boundary conditions can degrade shape-sensing accuracy. This work advances smart sensing and structural health monitoring for beam-like structures by coupling iFEM with an online identification of boundary-condition degradation. An aluminum beam instrumented with an fiber Bragg grating sensor network is tested under controlled degradations—rotational stiffness reduction and vertical support settlement—each modeled as a virtual spring with unknown stiffness. A nonlinear optimization routine estimates the spring parameters while iFEM performs real-time shape reconstruction. Results show high-accuracy displacement fields and reliable quantification of support degradation, with a maximum deviation of about 10% from ground truth for both rotational and vertical cases. The framework demonstrates practical feasibility for simultaneous shape sensing and boundary-condition assessment in operational environments.
No takes yet. Share an insight, caveat, or question.
Bardiani et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: