Within natural rock masses, discontinuous joints are more prevalent than continuous joints. Discontinuous joints refer to non-persistent structural planes separated by intact rock bridges and can be quantified by the continuity coefficient KA. They significantly affect the macroscopic mechanical properties of rock masses. Therefore, investigating discontinuous jointed rock masses with diverse morphologies carries considerable theoretical and engineering significance. Using 3D printing technology, resin-based specimens with discontinuous joints were subjected to laboratory mechanical tests to explore the evolution of failure mechanisms and mechanical properties of discontinuous jointed rock masses with different inclinations, undulation amplitudes, and structural plane continuity. Results show that under compression, discontinuous jointed rock masses consistently undergo combined tensile and shear stresses, with joint undulation amplitude and continuity governing coplanar crack initiation. As the joint inclination angle ranges from 0° to 90°, the peak compressive strength first decreases and then increases: specimens with continuous joints or discontinuous joints (continuity coefficient KA 0.25 exhibit a “U”-shaped trend. Joint continuity is a key factor governing rock mass strength: at the same rock column radius, higher continuity results in lower strength, and vice versa. Joint morphology also influences strength, with specimens with regular zigzag joints and rectangular corrugated joints exhibiting 6.7% and 11.2% higher strength than smooth-jointed specimens, respectively. These results clarify the effects of joint continuity and undulation on rock mass strength, providing a theoretical foundation for the rapid determination of KA via borehole imaging and laser scanning in engineering practice, and enabling direct prediction of rock mass strength trends.
Yang et al. (Wed,) studied this question.