This study examines the effects of temperature, relative humidity, moisture content, and density on the dielectric constant (ε′) and dielectric loss tangent (tan δ) of oak wood lamellae within a frequency range of 0.079 MHz to 25.1 MHz. The hypothesis tested was that increased temperature and moisture content enhance both dielectric polarization and loss, while density acts as a dominant structural determinant of dielectric behaviour. Oak lamellas were conditioned above saturated salt solutions at 20 °C and measured using an Agilent 4285A LCR meter according to ASTM D150-22. Multiple linear regression was used to demonstrate the statistically significant influence of temperature, relative humidity, moisture content, and density on the tested electrical properties of the lamellas. The results showed that the dielectric properties increase with higher sample density and higher air humidity. Temperature also had an influence, but it was significantly smaller, though still statistically significant (p < 0.05). Changes in dielectric properties were most pronounced at frequencies below 1 MHz, suggesting that dipolar and interfacial polarization are greater at lower frequencies. The findings in this paper provide a basis for optimizing the high frequency/dielectric heating process for heating before bending of oak and other similar hardwoods.
Pervan et al. (Thu,) studied this question.