Although mining activities are economically essential, they have led to significant environmental contamination, particularly in northern Chile. The discharge of untreated tailings has impacted coastal and soil ecosystems. This analysis investigates the biosorption and desorption of copper using the dried biomass of Lessonia berteroana, a brown alga, focusing on its reuse over multiple cycles. Biosorption experiments were conducted using synthetic copper sulfate solutions and real leachates (PLS) obtained from historically contaminated soils, obtaining maximum uptakes of 66.1 and 41.1 mg/g, respectively. In addition, four isotherm models—Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich (D–R)—were applied to describe equilibrium behavior. In synthetic systems, the Langmuir model described the data better. In the real matrix, the D–R model showed superior performance, indicating a more heterogeneous mechanism and a lower adsorption capacity. Desorption experiments, fundamental to evaluating the recyclability capacity of biosorbents, used HCl, HNO3, H2SO4, and C6H8O7 as desorbing agents. These experiments showed high initial efficiency (>95%) for all desorbents, and regeneration remained consistent over five cycles. In real PLS systems, nitric and citric acids maintained high desorption efficiencies with minimal degradation of biosorbent capacity. This study highlights the potential of L. berteroana as a sustainable biosorbent for copper recovery in both controlled and real-world applications, supporting its integration into circular economy strategies for mine-impacted environments.
Cortés et al. (Fri,) studied this question.