PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
January 22, 2026JACOW0 citationsOpen Access

Measurement of two beams positions with button BPM

View Full Paper
CLC. Liu

Key Points

  • The aim is to improve the measurement of positions of two beams in a shared beampipe by utilizing phase and amplitude data.
  • Experimental setup to measure two beams in a common beampipe.
  • Utilization of both phase and amplitude data for position calculations.
  • Delta over sum calculation implemented for more accurate positioning.
  • Improved accuracy in beam position determination using combined phase and amplitude data.
  • The method shows successful applicability for energy recovery linacs and colliders.

Abstract

Modern BPM processors utilize digital processing of the beam induced signals. The information on the signal amplitudes is used for the delta over sum calculation of the beam position, while the readily available phase information is usually discarded. We have experimentally tested measurement of the individual positions of two beams propagating in the common beampipe utilizing both phase and amplitude data. The proposed method can be used for the energy recovery linacs and colliders.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

C. Liu (2026) studied this question.

synapsesocial.com/papers/6971be8d642b1836717e32d7https://doi.org/10.18429/jacow-ibic2025-wepco28
Ask AI
Helpful
Bookmark
Share
View Full Paper