Answers are grounded in this paper and cite their sources.
Demonstrates optimal conditions for removing cationic dye from wastewater using bamboo biosorbents, indicating a sustainable treatment method.
To develop low-cost and renewable materials for treating dye wastewater, an efficient biosorbent was prepared from Bambusa emeiensis bamboo powders (BPs) via a simple alkali pretreatment. Systematic investigation revealed that NaOH concentration was critical for enhancing adsorption performance. Under optimal conditions (NaOH ≥ 0.2 mol/L, dosage = 10.0 g/L), the BPs achieved over 96% removal of cationic Methylene Blue (MB, 20 mg/L) within 20 min, demonstrating rapid kinetics. The adsorption process followed the Langmuir isotherm model with a maximum adsorption capacity of 4.1 mg/g without adjusting the pH of the solution and complied with the pseudo-second-order kinetic model. Thermodynamic analysis confirmed the spontaneous (ΔG < 0) and exothermic (ΔH = −52.73 kJ/mol) nature of the adsorption. Notably, the alkali-treated BPs exhibited a pronounced preference for the cationic dye, achieving a high removal rate of 96.5% for MB, in contrast to a much lower removal of 23.6% for the anionic dye AO7 under identical single-dye conditions, attributed to the enhanced surface negative charge after alkali treatment. Furthermore, the BPs maintained a high removal efficiency of 91.2% after eight adsorption-desorption cycles using 0.1 mol/L HCl as eluent, demonstrating excellent reusability. This study presents a feasible and sustainable strategy for designing regenerative bamboo-based biosorbents with rapid and preferential adsorption capabilities for cationic dye wastewater.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: