To address the challenges of the lack of specialized machinery adapted to traditional agronomic requirements, high labor intensity, and low efficiency in the planting of Ligusticum chuanxiong stalk segments (commonly known as Chuanxiong seed stalk or Lingzhong), a planting mechanism for the cutting of Chuanxiong seed stalk was developed in accordance with traditional agronomic requirements. A kinematic model of the gripping point was established, from which a plant spacing formula was derived. Based on the zero-speed planting principle, a cuttage planting scheme for Chuanxiong seed stalks was proposed, in which the gripper trajectory as well as the forward-tilt xt and correction xc were defined, and the decisive role of installation height on planting depth and the influence of driven-sprocket motion parameters on planting uprightness were elucidated. A 3D model and a DEM-MBD coupled simulation model were constructed to analyze planter–soil–seed interaction. A three-factor, three-level Box–Behnken experiment was conducted, and a response surface model was built and optimized using ‘Design-Expert’ software. The optimal parameters were a driven sprocket angular velocity of 0.654 rad/s, a rotation radius of 100.787 mm, and a release angle of 90.647°, yielding an average planting uprightness of 85.264°, with the corresponding xt and xc of 5.18 mm and 2.69 mm, respectively; the factor influence ranked as angular velocity > rotation radius > release angle. Seed–soil interaction analysis verified the mechanism’s feasibility and the accuracy of the theoretical models. Field tests showed average qualification rates of 87.13% for plant spacing, 96.01% for planting depth, and 90.41% for uprightness, with corresponding coefficients of variation of 4.37%, 2.95%, and 3.73%, indicating stable and reliable field performance.
Qiao et al. (Sun,) studied this question.