What question did this study set out to answer?

The aim is to improve the design of the TM020-mode RF cavity to reduce performance limitations and leakage.

February 14, 2026Open Access

Design of a 500 MHz TM020-mode cavity with elliptical choke for the high-current Super Tau-Charm Facility

Key Points

The aim is to improve the design of the TM020-mode RF cavity to reduce performance limitations and leakage.
Designed an improved TM020-mode RF cavity with an elliptical choke.
Analyzed leakage power reduction due to the elliptical choke.
Conducted thermal analysis to ensure design feasibility and stability.
Significant reduction in accelerating mode leakage was achieved.
Effective suppression of harmful parasitic modes was confirmed.
The improved cavity design supports beam currents of up to 2 A.

Abstract

Abstract A compact TM ₀₂₀ 020 -mode RF cavity was proposed and studied by KEK and RIKEN for the storage ring of the NanoTerasu facility. However, performance limitations due to accelerating mode leakage into the coaxial slots have been identified. This paper presents an improved TM ₀₂₀ 020 -mode cavity design to solve this issue. By employing an elliptical choke, the leakage power can be significantly reduced. Harmful parasitic modes other than the TM ₀₂₀ 020 -mode are effectively suppressed using the elliptical choke placed at the magnetic node of the TM ₀₂₀ 020 -mode. Through optimization, this improved TM ₀₂₀ 020 -mode RF cavity meets the requirements of the Super Tau-Charm Facility (STCF) collider rings with a beam current of up to 2 A. Detailed mechanical design and thermal analysis confirm the feasibility and stability of the improved cavity.

Mark Helpful

Bookmark

Relay

View Full Paper