Answers are grounded in this paper and cite their sources.
Experimental analysis examines wear and energy efficiency in nanoclay-reinforced bio-based epoxy composites, suggesting optimization benefits.
The dry sliding wear behaviour of nanoclay-filled bio-based epoxy composites was systematically investigated using a Taguchi L16 experimental design by varying nanoclay content (0–0.35 wt.%), normal load, sliding speed, and sliding time against an EN24 steel counterface. Wear loss, specific wear rate (SWR), frictional response, thermal rise, and energy-based descriptors were quantified, followed by mathematical and machine-learning (ML) based modelling. The results demonstrate that nanoclay addition significantly improves tribological performance up to an optimal content of 0.25 wt.%, beyond which wear instability increases. Compared with neat epoxy, the 0.25 wt.% nanoclay composite exhibited a reduction in steady-state coefficient of friction from ~0.53 to ~0.42, along with a 25–30% decrease in specific wear rate and the lowest energy-to-wear conversion efficiency, indicating more effective utilization of frictional energy. Taguchi analysis identified normal load as the dominant factor governing wear variation (~68% contribution), followed by sliding speed (~17%), while nanoclay content contributed ~5%. An energy-based wear model showed improved correlation with experimental wear volume (R2 ≈ 0.93) compared to a classical Archard-type formulation. ML prediction using a random forest model with leave-one-out cross-validation achieved an R2 ≈ 0.64 for SWR. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses confirmed a transition from severe abrasive wear in neat epoxy to stable tribofilm formation at 0.25 wt.% nanoclay, followed by heterogeneous debris-mediated wear at higher filler content. The observed reduction in wear loss and frictional energy dissipation supports sustainable materials innovation aligned with SDG 9 (Industry, Innovation and Infrastructure) and SDG 12 (Responsible Consumption and Production), while improved operational efficiency is consistent with SDG 7 (Affordable and Clean Energy).
No takes yet. Share an insight, caveat, or question.
Keshyagol et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: