Hydrogen-fueled gas turbines face challenges related to flashback risk, nitrogen oxide (NOx) emissions, and operational flexibility. In this study, a Center-Graded Spiral Micromixing (CGSM) combustor was designed and experimentally investigated to enhance the robustness of fuel–air mixing under hydrogen-rich conditions. The proposed CGSM concept employs spiral microtubes to induce curvature-driven secondary flows, promoting mixing through airflow-controlled mechanisms rather than relying solely on fuel jet momentum. Numerical simulations were conducted to qualitatively analyze the internal flow and mixing characteristics of the spiral microtubes, followed by pressurized combustor experiments at an inlet pressure of 0.3 MPa and elevated air temperatures. The experimental results demonstrate stable combustion of pure hydrogen under lean conditions, with NOx emissions being maintained below 25 ppm, corrected to 15% O2, without observable flashback or combustion oscillations within the designated operating range (from ignition to full load). The combustor further exhibits stable operation with blended hydrogen–methane and hydrogen–ammonia fuels, enabling online fuel switching without hardware modification. Application tests on an 80 kW micro-gas turbine indicate that the CGSM combustor can support stable operation across the full range of load conditions, from ignition to full-load operation, under both simple- and reheat-cycle modes, with performance characteristics that are consistent with established operational standards for micro-gas turbines. These results suggest that the CGSM concept provides a feasible micromixing strategy for hydrogen and hydrogen-rich fuels at a moderate pressure and micro-gas turbine scale.
He et al. (Fri,) studied this question.