Impeller blades are one of the main parts of a centrifugal pump that affect the performance of the pump. The presence of solid particles in seawater, transported through a centrifugal pump, causes wear in the blade surface that reduces blade lifetime. In the orthogonal direction, this wear is an erosion thickness of the blade. Assuming that these particles have a spherical shape, the erosion rate depends on their velocity, size, impingement angle, and material hardness index. In this work, we investigate the erosion thickness of a low-head centrifugal pump operating in pump and turbine modes, with a particle radius ranging from 4 μm to 50 μm. The numerical simulation used an RNG k–ε turbulence model, assuming a perfect bounce collision between the particle and the rotating solid wall. The study shows that the blade pressure side is impacted by a solid particle concentration higher than the suction side. In pump mode, the erosion thickness on the blade sides increases if the particle radius is above 4 μm and reaches a maximum at 40 μm. In turbine mode, the erosion thickness decreases when the particle radius is greater than 5 μm. The thickness loss is greater in turbine mode than in pump mode. The influence of particle flow rate was investigated. Below a particle radius of 10 μm, particles follow the flow directions and reside for a longer time in the blade channel. Passing from a particle radius of 50 μm to 100 μm, the blade lifetime was decreased by a factor of 11.
Mansour et al. (Fri,) studied this question.