Research on the Influence of Heating Power and Filling Ratio on the Heat Transfer Performance of Thermosyphon

To support the integration of high shares of renewable energy and enhance the operational flexibility of thermal power systems, thermosyphon have been considered as promising high-efficiency heat transfer components for thermal energy storage applications. In this study, a water-based thermosyphon motivated by molten-salt thermal energy storage scenarios is investigated numerically to clarify its internal heat-transfer behavior under different operating conditions. A two-dimensional CFD model is established based on the Volume-of-Fluid (VOF) multiphase approach coupled with the Lee phase-change model. The effects of heating power (3.5–5.0 kW) and liquid filling ratio (25–40%) on wall temperature distribution and thermal resistance characteristics are systematically analyzed. The results indicate that increasing the filling ratio improves the uniformity of the evaporator wall temperature, and a filling ratio of 40% leads to a relatively favorable liquid distribution and the lowest total thermal resistance within the investigated range. The evaporator thermal resistance exhibits a “decrease–increase” trend with heating power and reaches a minimum value of 1.019 × 10−4 K/W at 4.5 kW, while the condenser thermal resistance decreases monotonically with in-creasing heating power. This study provides comparative numerical insights into the coupled effects of heating power and filling ratio on thermosyphon performance, offering a reference for the component-level design and parameter selection of heat pipe heat exchangers in molten-salt-related thermal energy storage systems.