PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
February 28, 2026Journal of Chemical & Engineering Data0 citations

Liquid–Liquid Equilibria of Toluene–Alkanol Azeotrope Mixtures Using a Deep Eutectic Solvent: Measurement and Thermodynamic Modeling

View Full Paper
MSMohammad Alizadeh SaramiAGAli Ghanadzadeh GilaniNGNeda Gilani

Key Points

  • This research aims to explore the liquid-liquid equilibrium data for toluene and alkanol mixtures using a deep eutectic solvent.
  • Experimentally determined liquid-liquid equilibrium data at 298.2 K and 101 kPa.
  • Used a deep eutectic solvent made of choline chloride and ethylene glycol.
  • Compared equilibrium data and extraction capacities for alkanols from C1 to C5.
  • Applied the NRTL thermodynamic model to correlate and regress measured data.
  • Conducted stability tests to confirm the model parameters.
  • Extraction capacities differed for each alkanol in the ternary systems.
  • Solute distribution coefficients varied significantly among the alkanols studied.
  • Selectivity values indicated that the prepared deep eutectic solvent was effective in separating short-chain alkanols.

Abstract

Ternary liquid–liquid equilibrium (LLE) data were experimentally determined and systematically compared for the systems containing binary azeotrope mixtures toluene + alkanols (from C1 to C5) and a deep eutectic solvent (DES) at 298. 2 K and 101 kPa. The prepared DES was a binary mixture of choline chloride and ethylene glycol (DES; 1: 4 mol ratio). The DES was stable during the LLE experiments and was used to remove a series of short chain n-alcohols (from C1 to C5) from an aromatic hydrocarbon (toluene) through LLE experiments. The equilibrium data of the studied systems and extraction capacity of the DES for each system was compared and interpreted. The local composition model of the NRTL was correlated with the measured equilibrium data, and the model parameters were regressed. The reliability of the obtained model parameters was confirmed by topological analysis associated with the Gibbs tangent law and stability test. Evaluation of the extraction capacity of the studied systems was carried out through the solute distribution coefficient and selectivity data. The prepared DES lead to different selectivity values for the studied systems. The solute distribution coefficient values were found to be different for the ternary systems containing methanol, ethanol, 1-propanol, 1-butanol, and 1-pentanol.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Sarami et al. (2026) studied this question.

synapsesocial.com/papers/69a285da0a974eb0d3c00c52https://doi.org/10.1021/acs.jced.5c00778
Ask AI
Helpful
Bookmark
Share
View Full Paper