Answers are grounded in this paper and cite their sources.
Observational analysis compares Al2O3-water nanofluid and conventional coolant for PVT systems, suggesting notable efficiency improvements.
The present study investigates the performance enhancement of photovoltaic-thermal (PVT) systems using a comparison of conventional water coolant and Al₂O₃-water nanofluid coolant. Outdoor experiments were conducted in Pune, Maharashtra, India, by varying Al₂O₃ nanoparticle concentrations in a spiral copper thermal absorber integrated with a polycrystalline PV module. The objective was to evaluate how coolant type and nanoparticle loading influence overall PVT system efficiency with practical feasibility. The study uniquely combines thermal, electrical, hydraulic considerations to identify the realistic applicability of Al₂O₃ nanofluid cooling in PVT systems with spiral thermal absorber. This holistic approach provides practical insights for optimizing PVT performance in domestic and industrial applications under Indian climate conditions-representing a significant advancement over existing studies. The higher thermal conductivity of the Al₂O₃ nanofluid facilitated more effective heat extraction from the PV surface, resulting in reduced operating temperature, improved electrical output, and enhanced thermal energy recovery. Al₂O₃ water-nanofluids proved particularly effective, enhancing thermal conductivity and facilitating heat recovery of 5-12 °C. Improvements were observed in thermal efficiency (57.51%), electrical efficiency (9.8%), overall efficiency (67.31%), and energy-saving potential (30.66%). For the water-cooled PVT system, a Reynolds number of 1717.6 was recorded, which decreased by 11.67% to 1517 at the highest nanofluid concentration. The friction factor increased from 0.0906 (water cooling) to 0.0966 with 5% Al₂O₃ nanofluid, while the pressure drop rose from 521.0 to 829.6 Pa. Although performance improves with increasing nanoparticle concentration, the accompanying rise in viscosity, friction losses, and preparation cost leads to higher pressure drop and pumping requirements.
No takes yet. Share an insight, caveat, or question.
Satpute et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: