Answers are grounded in this paper and cite their sources.
Optimises process parameters for improved efficiency in propane-propylene desulphurisation, indicating significant industrial benefits.
The purpose of the study was to optimise the parameters of the propane-propylene desulphurisation process to increase its efficiency. The study analysed the influence of temperature, pressure, and adsorbent type on the effectiveness of the propane-propylene desulphurisation process. It was found that an increase in temperature contributes to an increase in the rate of adsorption of sulphur compounds, but this effect persists only up to a certain temperature value. After reaching a certain limit, the temperature begins to have a negative effect on the adsorbent, causing its degradation. Based on the data obtained, the optimal temperature for maximum efficiency of the desulphurisation process was determined to be in the range of 250-300°C. The effect of pressure on the desulphurisation process turned out to be significant: increasing the pressure improves the results, as it increases the density of the gas phase, which, in turn, contributes to better capture of sulphur compounds. However, if the pressures are too high, there is no additional improvement in the results, and the energy costs of the process increase. In addition, aluminium oxide proved to be the most effective of all the adsorbents considered. It has demonstrated the best results compared to activated carbon and silica gel under optimal temperature and pressure conditions, providing the greatest degree of sulphur removal from the gas mixture. Ultimately, the mathematical models developed during the study confirmed that optimising the temperature and pressure parameters can significantly increase the efficiency of the desulphurisation process. This allows not only increasing the degree of sulphur removal, but also reducing energy costs and extending the service life of the equipment, which is important for its practical application. The practical value of the research lies in the fact that an integrated approach that considers the relationship between temperature, pressure, and adsorbent type significantly improves the desulphurisation process on an industrial scale, providing higher efficiency and cost-effectiveness
No takes yet. Share an insight, caveat, or question.
Rahimli et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: