Answers are grounded in this paper and cite their sources.
Observational analysis reveals enhanced performance of acid-leached oct-PtNi cathode catalyst in PEMFCs, suggesting a viable alternative to conventional Pt catalysts.
Proton exchange membrane fuel cells (PEMFCs) are considered as a promising renewable power source. However, the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied performance mainly due to the sluggish oxygen reduction reaction (ORR) kinetics even on state-of-the-art Pt catalyst. Octahedral PtNi nanoparticles (oct-PtNi NPs) with excellent ORR activity in a half-cell have been widely studied, while their performance in membrane electrode assembly (MEA) has much less reported. Herein, we investigated the MEA performance using the carbon supported oct-PtNi NPs (oct-PtNi/C) as the cathode catalyst. Under the mild acid washing condition, the surface Ni atoms of oct-PtNi/C were largely removed, and the performance of the MEA using the acid-leaching oct-PtNi/C (PNC-A) as the cathode catalyst was greatly improved. The maximum power density of the MEA reached 1.0 W·cm–2 with the cathode Pt loading of 0.2 mg·cm–2, which is 15% higher than that using Pt/C as the catalyst. After 30k cycles in the accelerated degradation test (ADT), the MEA using PNC-A as the catalyst showed a performance retention of 82%, higher than that of Pt/C (74%). The results reported here verify the possibility of using PNC-A as an advanced cathode catalyst in PEMFCs, thus enhancing the performance of PEMFCs while lowering the amount of expensive Pt.
No takes yet. Share an insight, caveat, or question.
Feng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: