Answers are grounded in this paper and cite their sources.
Observational analysis reveals effective iron removal and high TiC recovery using optimized magnetic separation methods.
To improve the size uniformity of TiC-bearing carbide slag for subsequent chlorination and reduce iron-related risks, Isa mill grinding and wet magnetic separation were optimized. The results show that the grinding process parameters have a significant impact on the particle size distribution of the product. Under the optimal conditions of a grinding Isa mill speed of 400 rpm, a pulp concentration of 36%, and a medium filling rate of 50%, the content of the intermediate particle size of 100-250 mesh in the ground product can reach 65.95%, and the particle size distribution is relatively narrow compared to typical grinding methods. Microscopy indicates that metallic Fe is closely associated with part of TiC, leading to minor TiC entrainment during iron removal. At 0.01256 T, total Fe (TFe) removal in tailings achieved 56.82%, while TiC recovery remained 98.53%, defining a practical operating window that balances iron removal efficiency and TiC loss.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: