Answers are grounded in this paper and cite their sources.
Two-component waterborne polyurethane (2KWBPU) coatings often require organic co-solvents to reduce polyisocyanate (PIC) viscosity for effective mixing with aqueous polyol dispersions. While these co-solvents are typically considered passive diluents, emerging evidence suggests they actively influence film formation and final coating properties. This study systematically investigates how co-solvent molecular structure affects film formation mechanisms in 2KWBPU systems using Förster resonance energy transfer (FRET). Five co-solvents with varying polarity, volatility, and water miscibility were examined: dipropylene glycol dimethyl ether (DPGDME), 2-(2-butoxyethoxy)ethyl acetate (BGDA), propylene glycol monomethyl ether acetate (PGMEA), propylene carbonate (PC), and tetrahydrofuran (THF). FRET studies with dual-labeled polyol latex particles revealed that co-solvent effects on film formation follow distinct structure-property relationships. Volatile solvents (THF, ethyl acetate) created vertically heterogeneous films, while high-boiling polar solvents (PC, PGMEA, BGDA) promoted uniform, extensive particle swelling ( Φ ET ≈ 0.59–0.62). Low-polarity solvents (DPGDME) enabled moderate, uniform swelling ( Φ ET ≈ 0.67) limited by reduced polyol compatibility. Hansen solubility parameter analysis provided quantitative structure-property correlations, while atomic force microscopy confirmed solvent-dependent particle deformation predicted by FRET measurements. FTIR spectroscopy revealed that co-solvent retention significantly influences crosslinking kinetics, with high-boiling solvents extending cure times through reactant dilution. These findings demonstrate that co-solvent selection critically influences both film formation and cure times, providing a framework for rational formulation design in waterborne polyurethane coatings. • Co-solvents actively govern film formation in waterborne 2K polyurethane coatings. • FRET directly quantifies solvent-dependent polyol chain interdiffusion and swelling. • Volatile solvents induce vertical film heterogeneity during drying. • High-boiling polar solvents enable uniform, extensive intra-particle swelling. • Co-solvent retention significantly alters polyurethane cure kinetics.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: