Answers are grounded in this paper and cite their sources.
This design project develops and optimizes a chocolate enrobing machine for cookies, indicating its efficiency for small businesses.
Chocolate coating is typically applied using an enrober, a machine that creates a continuous chocolate curtain through which the products to be coated pass. Small capacity enrobing machines suitable for small and medium‐scale entrepreneurs are currently unavailable. To address this gap, an effort has been made to develop an affordable and efficient chocolate enrobing machine for cookies. The machine was designed and fabricated by considering critical parameters related to both cookies and chocolate. The chocolate enrobing machine operates through an integrated process involving melting, coating, and finishing. Response Surface Methodology was used to optimize the chocolate enrobing process by studying the effect of three independent variables—chocolate flow rate (3, 4.5, and 6 kg/min), belt speed (2.1, 2.3, and 2.5 m/min) and hot air flow rate (3.3, 3.6, and 3.9 L/s) on the responses—capacity, enrobing efficiency, energy requirement, and coating thickness, using a Box Behnken design. Chocolate flow rate was determined by measuring the mass of chocolate discharged per minute, belt speed represented the movement of cookies through the coating zone and hot air flow rate indicated the volume of air passing per unit time. The independent parameters were selected based on the preliminary analysis and optimized based on the performance of the machine during the chocolate enrobing process. The optimization determined the optimal conditions of 4.5 kg/min chocolate flow rate, 2.5 m/min belt speed and 3.3 L/s hot air flow rate. Performance evaluation of the machine was done in terms of capacity, enrobing efficiency, energy requirement, enrobing ratio, and coating thickness. The machine achieved a capacity of 190 cookies/h, enrobing efficiency of 94.74%, and energy requirement of 5.48 kWh. Enrobing ratio and coating thickness of chocolate‐enrobed cookies were found to be 76% and 2.79 mm, respectively. The benefit–cost ratio of the developed machine was calculated to be 1.05:1, with a payback period of 3.15 years.
No takes yet. Share an insight, caveat, or question.
Haritha et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: