What question did this study set out to answer?

This research aims to optimize plasma electrolytic polishing parameters for GH3536 superalloy to improve surface quality.

March 15, 2026MaterialsOpen Access

Precision Plasma Electrolytic Polishing of GH3536 Superalloy for Effective Surface Performance Improvement

View Full Paper

Ask AI

Bookmark

Authors

CPChengtao Peng SWShuo Wu XWXuemei Wang

Discussion

Member takes

Overview

Response surface methodology improved surface roughness and corrosion resistance in GH3536 superalloy, suggesting enhanced aerospace application durability.

Key Points

This research aims to optimize plasma electrolytic polishing parameters for GH3536 superalloy to improve surface quality.
Single-factor experiments were conducted to optimize polishing parameters.
Response surface methodology was applied to determine the best conditions for polishing.
Polishing efficiency and surface quality were assessed based on various metrics.
Achieved a minimum surface roughness Ra of 0.044 μm under optimized conditions.
Material removal rate was 59.12 mg·min−1 during the polishing process.
Corrosion resistance improved with a 53.72% increase in polarization resistance.

Cite This Study

Peng et al. (2026) studied this question.

synapsesocial.com/papers/69b606d583145bc643d1d3ec https://doi.org/10.3390/ma19061127

View Full Paper

Ask AI

Bookmark

March 15, 2026MaterialsOpen Access

Precision Plasma Electrolytic Polishing of GH3536 Superalloy for Effective Surface Performance Improvement

View Full Paper

Ask AI

Bookmark

Authors

CPChengtao Peng SWShuo Wu XWXuemei Wang

Discussion

Member takes

Overview

Response surface methodology improved surface roughness and corrosion resistance in GH3536 superalloy, suggesting enhanced aerospace application durability.

Key Points

This research aims to optimize plasma electrolytic polishing parameters for GH3536 superalloy to improve surface quality.
Single-factor experiments were conducted to optimize polishing parameters.
Response surface methodology was applied to determine the best conditions for polishing.
Polishing efficiency and surface quality were assessed based on various metrics.
Achieved a minimum surface roughness Ra of 0.044 μm under optimized conditions.
Material removal rate was 59.12 mg·min−1 during the polishing process.
Corrosion resistance improved with a 53.72% increase in polarization resistance.

Cite This Study

Peng et al. (2026) studied this question.

synapsesocial.com/papers/69b606d583145bc643d1d3ec https://doi.org/10.3390/ma19061127

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

View Full Paper

Ask AI

Bookmark