Answers are grounded in this paper and cite their sources.
Researchers demonstrate high-selectivity and durability in nanofiltration membranes using pH-fractionated lignin, suggesting improved efficiency in filtration applications.
Polyamide thin-film composite (TFC) membranes provide high permeability and strong ion rejection in nanofiltration and reverse osmosis, but oxidants like chlorine can impair their long-term performance. To overcome this, alternative chemistries are needed to improve durability while maintaining separation efficiency. Lignin-based polyester TFC membranes are promising, offering better antifouling and chlorine resistance. However, their lower salt rejection hampers wider adoption. Here, we used distinct molecular-weight fractions of lignin to fabricate polyester TFC membranes and assessed how fraction-specific physicochemical properties govern membrane structure and performance. Lignin was separated into five fractions (B1–B5) via pH fractionation. Among the resulting membranes, the B4-derived TFC (M-B4) achieved the best overall performance, delivering 98% rejection of Na 2 SO 4 and 41% rejection of NaCl with a water flux of 45 LMH. The B4 fraction isolated at pH 3.1, with a smaller particle size and a high phenolic hydroxyl content (2.1 mmol g −1 ), yielded a highly crosslinked polyester with increased hydrophilicity and surface roughness. M-B4 also exhibited excellent antifouling performance, with a flux recovery ratio (FRR) of 99% after three cycles, and strong operational stability, with only a 2% reduction in Na 2 SO 4 rejection and a 5.5% decrease in water flux after 12 h of extended filtration. Additionally, after four days of chlorine exposure, Na 2 SO 4 rejection decreased by just 2%, while water flux increased by 9%. Finally, we performed a cost analysis for large-scale manufacturing and benchmarked the estimated production cost against reported prices for conventional polyamide TFC membranes. This innovative yet simple strategy positions lignin-based polyester membranes as sustainable and efficient alternatives to polyamide membranes. • pH-fractionated lignin enables tunable polyester TFC NF selective layers. • M-B4 delivers ~45 LMH flux with ~98% Na 2 SO 4 rejection. • Higher phenolic-OH fractions yield denser, more selective films. • Excellent antifouling: up to ~99% flux recovery after 3 cycles. • High reliability under chlorine exposure and extended filtration run.
No takes yet. Share an insight, caveat, or question.
Taghipour et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: