Answers are grounded in this paper and cite their sources.
Field measurements optimize stress distribution in coal seams, highlighting implications for mining safety.
An elastic mechanical calculation model was established to optimise the position of the open-off cut in the lower coal seam. Field measurements were employed to evaluate the fractured zone in the surroundings of the open-off cut. As the vertical distance between 22# and 42# coal seams increased, the stress gradually decreased at point M. The normal and shear stresses in the y-axis first increased and then decreased with increased y-axis. Stress peaks concentrated near 30 and 160 m from the stopping line of 22# coal seam under different mining heights, while the minimum stress occurred at about 15 and 165 m. The loosening circle around the open-off cut in 42# coal seam ranged from 2.9 to 4.6 m. Positioning the open-off cut of 42# coal seam about 50 m from the stopping line of 22# coal seam avoided the influence of the protective coal pillar on the stress peak.
No takes yet. Share an insight, caveat, or question.
Chang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: