Soft Actor-Critic-Based Power Optimization Method for UAV Wireless Charging Systems

Maintaining high power delivery under uncertain landing positions is a key challenge for wireless charging of unmanned aerial vehicles (UAVs). This paper presents a data-driven power optimization method based on the Soft Actor-Critic algorithm for multi-transmitter single-receiver wireless power transfer (MTSR-WPT) systems. To support effective learning without explicit online parameter identification, a physics-informed dual-current state representation is constructed from measurable current responses, combining a zero-phase current with the current response under the applied phase command. The agent is trained using a reward defined directly from normalized load power, and the transmitter voltage phases serve as the control actions. In simulations of a five-transmitter system, the learned policy achieves about 97% of the theoretical maximum power in the training region and about 96% in the expanded evaluation region. Additional robustness studies show strong performance under moderate measurement noise and substantial recovery under model mismatch after short fine-tuning. Experimental validation on a physical prototype confirms the effectiveness of the method, yielding an average power improvement of 188% from a zero-phase baseline and reaching 87% of the maximum power measured on the hardware platform. These results support the proposed method as a practical data-driven alternative to model-dependent MTSR-WPT power optimization for UAV wireless charging.