Answers are grounded in this paper and cite their sources.
Demonstrates wall slip behavior impacts cleaning efficiency in high-burn-rate propellant mixers, suggesting automated solutions.
Composite solid propellant mixers face severe post-mixing cleaning challenges, especially for high-burn-rate propellants. Manual cleaning remains necessary due to the high viscosity and friction sensitivity of energetic ballistic modifiers (EBMs), which hinders automation and poses safety risks. This study explores the wall slip behavior of high-burn-rate propellants (non-Newtonian fluids)—a phenomenon that departs from the no-slip boundary condition in fluid mechanics (where fluid velocity at the solid surface is assumed to be zero) and occurs when the applied shear stress exceeds a critical value—and its application in mixer cleaning. We performed rheological tests using HAAKE Viscotester IQ (Couette system) (Thermo Fisher Scientific, located in Karlsruhe, Germany) and TA/ARES-G2 rheometer (parallel plate system) (TA Instruments, located in New Castle, DE, USA) to analyze the shear stress, viscosity, and wall slip characteristics of the propellants and inert materials. Tests on three inert materials (A, B, C) showed that A and B exhibit wall slip with shear stress exceeding 2313.6 Pa, achieving complete or near-complete residue removal. In contrast, C does not exhibit wall slip and has insufficient stress, resulting in poor cleaning performance. This work verifies that leveraging the wall slip behavior of high-burn-rate propellants with inert materials can achieve manual-free mixer cleaning, laying a foundation for future unmanned, automated cleaning of high-burn-rate propellant mixers.
No takes yet. Share an insight, caveat, or question.
Hou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: