Abstract In this study, an aqueous suspension containing fine aluminum oxide and coarser titanium nitride (TiN) powders was prepared and processed using high-velocity suspension flame spraying (HVSFS) to produce thick TiN/ Al 2 O 3 composite coatings (>50 µm). The influence of spraying parameters, such as total gas flow and flame stoichiometry, on the microstructure, phase composition, mechanical, and tribological properties was investigated. The results demonstrate that TiN can be successfully deposited under atmospheric conditions using the HVSFS process, achieving a homogeneous distribution of TiN particles within the alumina matrix. This composite structure led to a significant increase in microhardness. Furthermore, the TiN/ Al 2 O 3 coatings produced with λ = 0.8 exhibited improved wear resistance and a reduced coefficient of friction compared to pure Al 2 O 3 coatings.
Akin et al. (Tue,) studied this question.