Answers are grounded in this paper and cite their sources.
Examines how build orientation and heat treatment affect AlSi7Mg alloy properties, suggesting optimal conditions for manufacturing.
Molten Metal Jetting (MMJ) is an emerging metal additive manufacturing process that produces components via on-demand jetting of discrete droplets. This paper reports properties of T6 heat-treated AlSi7Mg alloy produced in different build orientations via MMJ. A Xerox ElemX machine was used to print AlSi7Mg coupons in horizontal, tilted, and vertical orientations. The aluminum feedstock was melted at 825 °C and was printed onto a 475 °C heated print bed using a jetting frequency of 400 Hz and a drop spacing of 500 μm. Coupons were heat treated to a T6 temper. The average yield strengths of heat-treated coupons in vertical and horizontal orientations were 240.4 ± 7.3 MPa and 244.6 ± 7.1 MPa respectively. This indicates that the vertical build orientation had minimal adverse effect on strength. However, average strain (11.5% ± 1.2% versus 14.6% ± 3.5%) values for the vertical and horizontal orientations, respectively, showed more pronounced effects. X-ray CT analysis of vertically oriented coupons revealed increases in porosity in material deposited above heights of ~90 mm. Above this build height, the measured surface temperature dropped below ~455 °C. External heating methods are therefore advised in order to maintain a surface temperature ≥ 455 ° and avoid excess porosity.
No takes yet. Share an insight, caveat, or question.
Rifat et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: