Answers are grounded in this paper and cite their sources.
Microsized porous silicon enhances electrochemical performance in lithium-ion batteries, suggesting a new manufacturing method.
A micro‐sized porous crystalline silicon was successfully synthesized through a molten salt decalcification approach by treating CaSi 2 in both CaCl 2 and CaCl 2 ‐KCl melts. Upon treatment in CaCl 2 at 900°C for 6, 12, and 24 h, the residual calcium content in the silicon products decreased to 6.03%, 4.05%, and 1.30%, respectively. Similarly, in CaCl 2 ‐KCl melts held at 700°C, 800°C, and 900°C for 24 h, the calcium content dropped to 9.38%, 6.64%, and 1.48%, respectively. Higher temperatures and extended durations facilitated more efficient calcium removal, yielding silicon with increasingly porous and dendritic features. One representative sample, MC‐3 (derived from CaCl 2 melts at 900°C for 24 h), was coated with a polydopamine‐derived carbon layer via polymerization and subsequent carbonization, forming a uniform shell of 10–30 nm thickness. The resulting MC‐3@C composite, when employed as an anode material for lithium‐ion batteries, delivered a reversible specific capacity of 647.5 mAh g − 1 after 700 cycles at 1 A g − 1 and demonstrated outstanding rate capability. This work presents an efficient molten salt strategy for fabricating microporous crystalline silicon with enhanced electrochemical performance, offering a scalable and cost‐effective alternative to conventional silicon‐based anode materials.
No takes yet. Share an insight, caveat, or question.
Gao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: