Answers are grounded in this paper and cite their sources.
Research proposes a beam element model predicting curing deformations in composite structures, suggesting design improvements for manufacturing accuracy.
This study proposes an efficient beam element model within a thermo-chemo-mechanical framework for predicting curing deformations in thin-walled composite structures. The path-dependent constitutive model accounts for cure-phase transitions and efficiently computes internal forces from thermal expansion and chemical shrinkage. Validation against experimental data for L-shaped and C-shaped components demonstrated close agreement, with maximum errors below 11%. Parametric studies reveal distinct geometric influences: for L-shaped profiles, the spring-back angle decreases with greater thickness or larger corner radii but increases significantly with longer leg lengths. Conversely, for C-shaped profiles, spring-back decreases with thickness yet increases with larger radii. Across both geometries, cross-ply laminates exhibit greater deformation than unidirectional lay-ups due to their lower circumferential stiffness. The exceptional computational efficiency (≤30 s per case) facilitates extensive parametric analysis, providing practical insights for mitigating deformation through targeted geometric and lay-up optimization. This approach offers a robust and efficient tool for improving manufacturing accuracy in composite airframe components.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: