Answers are grounded in this paper and cite their sources.
Evaluates seismic performance in low- and mid-rise buildings, showing configurations that affect collapse likelihood.
The seismic performance of residential buildings is a pressing concern in high‐seismicity regions. In Colombia, Thin Lightly Reinforced Concrete Wall (TLRCW) buildings have become a common solution to address the housing deficits. This study evaluates the impact of structural configuration on the seismic performance of 52 low‐ and mid‐rise constructed TLRCW buildings, examining key parameters such as stiffness index, wall index, aspect ratio, longitudinal reinforcement ratios distributed in the wall web and concentrated at the wall edge, wall thickness, and confinement. Numerical simulations in OpenSeesPy were used to assess the performance of archetypes under a set of hazard‐consistent ground motion records, generating fragility curves for each archetype. For each archetype, the seismic performance is evaluated in terms of the probability of collapse for the maximum considered earthquake (MCE). The results show that certain structural configurations can increase the probability of collapse for low‐rise and mid‐rise buildings. Specifically, very thin walls (80–100 mm) with aspect ratios greater than 6, light longitudinal reinforcement ratio distributed in the wall web using a single layer of welded wire mesh (less than 0.20%), and light vertical reinforcement concentrated at the wall edge (less than 0.50%) increase the probability in low‐rise buildings. In contrast, high steel ratios of vertical reinforcement concentrated at the wall edges (more than 2%) combined with low web reinforcement (0.20% or less) are key attributes in mid‐rise buildings that lead to unacceptable seismic performance.
No takes yet. Share an insight, caveat, or question.
Bonett et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: